Contact Us
Wheel Loader Work Tools
Standard Bucket
Tool Introduction
The PS Standard Bucket applies unique arc side edge plate to prevent material from scattering, and lessen insert resistance, which increase productivity by 10%, we also robust the design for higher breakout force.
The high wear-resistant secondary cutting edge is bolted to the main bottom blade, and which is interchangeable with the bucket teeth.
According to the height of the customer‘s unloading, we have configuration of standard lift arm, high lift arm and Supper high lift arm. According to working condition, the bucket is installed with tooth or cutting edge.
Recommended Applications
This bucket is mainly used for hauling, loading/unloading, stock piling and cleaning in ports, docks, etc. It can also be used for general construction applications including material handling.
Coal Bucket
Tool Introduction
This bucket is designed specially for material of small density and low abrasion resistance, With standard lift arm or high lift arm to meet different customer requirements. Equipped with high-strength cutting edge, it has a much larger capacity than standard bucket, increasing productivity by more than 50%.
Categories
2 Types: Pin-on and Quick Coupler connections.
Recommended Applications
Coal bucket is mainly used for loading stock piling light material in coal mines, freight yard, ports, power plant, biomass, paper mill etc.
Rock Bucket
Tool Introduction
Standard rock bucket: The bucket is equipped with straight and flat main cutting edge as well as durable side cutting edge teeth. After finite element analysis (FEA) and on-site test, the bucket features high strength and durability.
Spade Nose Rock Bucket: The V-shaped main cutting edge effectively reduces the resistance when inserting into material. With high wear resistant bucket tooth and secondary cutting edge, the bucket features high strength, wear resistance, impact-resistance through finite element analysis and the actual working conditions verification.
Categories
2 Types: Pin-on and Quick Coupler connections.
Recommended Applications
Rock bucket is mainly used for loading, transporting and digging primary soil and crushed stones after blasting operation during mining.
Side Dump Bucket
Tool Introduction
Side dump bucket can achieve front jobs and side jobs, which can dump material at any positions according to jobsite requests by adjusting the cylinder of the side discharge. The cutting edge and side plate are made of high strength, and wear resistant materials, which are better adapted to load and unload the rocks and other dense materials.
Recommended Applications
Suitable for work site with narrow space, such as tunnels, highways etc.
Log Grapple
This Wheel Loader with triple tool is special for loading and stockpiling log in forestry, at port and on railway. The grapple can also be changed with bucket. The selection of grapple needs to base on the size and weight of log.
Type/Upper teeth combined
Small min circle easy to hold the wood and not easy to cause the wood to slip. The width is relatively small and the upper single tooth design suitable for working 3-6m and small diameter logs.
Type/Large Capacity Configuration
The fork is large circle and small width, the upper and lower teeth are jointed in a circular state, it is suitable for working 4-6m and small diameter logs, unloading is greater.
Type/Corresponding Teeth
Can use single tooth extracted one log from log pile ,The area of the hoop and fork width is large, it suitable for working 4-9m and grasp multiple logs once.
Type/ Crossed Teeth
Small min circle easy to hold the wood and not easy to cause the wood to slip, it is suitable for working 3-9m and large dimeter logs.
Hay Fork
Tool Introduction
Hay fork uses multi-tooth and corresponding structure design, which is mainly used for loading and unloading such as carton, bark, wood chips, branches, etc., widely used in paper mills, wood processing plants, bio-power plants, etc. The fork passes through finite element analysis and actual application verification, which delivers big load capacity and high reliability.
Categories
2 Types: Pin-on and Quick Coupler connections.
Recommended Applications
Hay fork is mainly used for grabbing, loading/unloading, transporting raw materials, such as straws, tree branches, tree barks.
Fork
Tool Introduction
Fork consists of two flat tines and body frame, and the tines are adjustable in horizontal. The tines are forged with wedge-shaped front end for ease of loading materials. The main frame and fork teeth pass through not only the finite element analysis (FEA) but also actual working conditions, which also features high strength and durability.
Categories
2 Types: Pin-on and Quick Coupler connections.
Recommended Applications
Pallet fork is mainly used for loading, unloading in ports, freight yards and recycling plants, transporting and stacking in marble mining, processing field and other conditions.
Hose Grapple
Tool Introduction
Hose grapple is used to grip Hose-shaped and string-shaped materials which deploys staggered tooth design.
It covers wide range of diameter to meet different material requirements.
Categories
2 Types: Pin-on and Quick Coupler connections.
Recommended Applications
Hose grapple is mainly used for grabbing, unloading and transporting Hoses in oil fields, docks and Hose laying site.
Quick Coupler
Tool Introduction
Bracket Quick coupler is a coupling device between the lift arm and work tools, you can install a variety of work tools through a common connection to achieve versatility.
Hydraulic triple Implement valve needed for some work tools.
Recommended Applications
Quick coupler is mainly used for multi-job conditions, through rapid replacement of different work tools to meet a variety of operating conditions, to achieve versatility.
